W1209 DC 12V -50 to +110'C Temperature Controller Control Switch Thermostat Thermometer Sensor Module (Red)

Specification: Supply voltage: DC 12V Static current: less than 5MA, attract current: less than 65MA Output voltage: DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10~60'C, Humidity 20%~85% Dimensions: 48 * 40mm Cable length: About 30 cm Temperature control mode: ON / OFF Temperature range: -50~+110'C Control accuracy: 0.1'C Hysteresis accuracy: 0.1'C Refresh rate: 0.5S High temperature protection: 0~110'C Resolution: When temperature is 0.1'C, the resolution is -9.9~99.9, other temperature segment is 1'C Display Type: 0.28-inch digital tube How to use: Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature, Press the SET button, the display flashes the temperature, Press - to set the desired temperature, After setting press SET to confirm return, The controller automatically performs the relay by setting off! Lights, LED status descriptions: Indicator: Off The relay is switched off, Always indicate the relay is closed. LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection. Package Included: 1 x -50-110'C W1209 Digital thermostat Temperature Control Switch 12V + sensor.

• Supply voltage: DC 12V, Output voltage: DC 12V, Output power: 10A relay
• Measurement input: NTC (10K 0.5%) Waterproof Sensor, Temperature control mode: ON / OFF, Temperature range: -50~+110'C
• Control accuracy: 0.1'C, Hysteresis accuracy: 0.1'C, Refresh rate: 0.5S, High temperature protection: 0~110'C
• Resolution: When temperature is 0.1'C, the resolution is -9.9~99.9, other temperature segment is 1'C
• Display Type: 0.28-inch digital tube