2 Sets Brake Bleeder Kit,Universal Brake Bleeder Hose One Way Check Valve for Brakes Fluid Change & Maintenance,Professional Break Bleeders Kit Includes Hose,Clamp,Dust Caps

Brake Bleeder Kit: Your Professional-Grade Motorcycle Brake System Maintenance SolutionProduct AttributesInlet Hose Size: 6.02*0.24*0.24 inchInlet Hose ID: 0.16 inchOutlet Hose Size: 14.17*0.32*0.32 inchOutlet Hose ID: 0.20 inchCheck Valve Size: 2.08*0.50*0.50 inchCheck Valve Inlet OD: 0.18 inchCheck Valve Outlet OD: 0.22 inchLarge Clamps Size: 0.56*0.54*0.32 inchLarge Clamps ID: 0.31 inchSmall Clamps Size: 0.48*0.42*0.24 inchSmall Clamps ID: 0.24 inchScrew Caps Size: 0.47*0.47*0.44 inchScrew Caps ID: 0.23 inchWeight: 2.56 ozColor: BlackMaterial: Rubber, AluminumPackaging: 2x Inlet Hose, 2x Outlet Hose, 2x Check Valve, 4x Small Clamps, 2x Large Clamps, 6* Bleeder Screw CapsPackage Sizes: 6.15*5.09*1.35 inchProduct Feature & Functions1. The car brake bleeder hose is transparent design, in the process of brake bleeding can smoothly guide the flow of brake fluid to avoid spillage and splashing, and the situation inside the hose can be seen at a glance2. The brake bleeder caps in the car brake bleeder tool protect the bleeder screws and can be tightly fitted after the bleeding process is completed to realize a dust-proof sealProduct Installation1. Detach the protective cap from the oil drain valve, and then tightly connect the end of the hose to the drain valve connector to confirm that the hose is securely connected2. Locate the oil filler cap and unscrew the screws of the cap3. Slowly loosen the oil drain screw using a suitable tool. The old oil in the brake system will now flow slowly out of the hose4. Add new standardized brake fluid to the inside, taking care to maintain the filling rhythm. At the same time, squeeze the brake by hand, the oil level should be higher than the drain port, which is the core point to avoid air entering the brake line5. Repeat the above step until you see that the fluid coming out of the hose shows the clear color of new oil and there are no air bubbles, indicating that the old oil in the system has been completely replaced, then you can stop the cycle of action6. Re-tighten the oil cap with screwsNote: Please check that our brake bleed kit part sizes match your braking system before buying

• Avoid Backflow: The brake bleed kit features a precision one-way check valve design that allows only brake fluid and air to flow out during bleeding. This effectively avoids air, dust, and dirt from entering the brake system in reverse, maintaining internal cleanliness
• Complete Kit: This comprehensive solution includes 2 short brake bleeder hoses, 2 long brake bleeder hoses, 2 aluminum one-way brake bleeder valves, 4 small clamps, 2 large clamps, and 6 bleeder screw dust caps. Suitable for most motorcycles and automobiles
• Dust Protection: The dust cap included with the brake bleeding kit is highly practical. When not in use, place it over the bleed screw to avoid dust, oil and dampness buildup. This keeps the screw clean and allows for smooth operation when needed
• Durable Materials: The brake bleeder check valve is crafted from premium aluminum, which is not prone to rust. The brake bleeder hose utilizes a highly transparent, flexible specialized material, allowing clear observation of bubbles and fluid condition for long-lasting use
• Single-Person Operation: Simply follow these straightforward steps: connect the hose (note the arrow direction), loosen the bleed valve, then slowly operate the brake lever to complete the bleeding process. No assistant is required—one person can efficiently and effortlessly perform brake system maintenance